Introducing ELPM-S3LW v1.1!
ESP32-S3FN8, SX1262, Deep stop, Extreme Low Power, LDOs 🔥

PCBs manufactured by PCBWay

#pcb a #pcb #design #engineering #hardware #lora #sx1276 #sx1262 #objex #esp32

SoC level integration vs discrete IC based #LoRa modules.
Both of these come with a SX1262 LoRa transceiver, but one has a #STM32 . Guess which one?

ELPM-S3LW almost ready for sale!

PCBs manufactured by PCBWay

#pcb #pcb a #electronics #embedded #pcb design #objex #iot #esp32 #esp32 S3 #sx1262 #lora

RP2040 LORA （433M 868M 915M 2.4G SX1278 LLCC68 SX1262 SX1268 SX1280 ）There are 5 versions to choose from，Equipped with lithium battery charging circuit, can be connected to external solar battery power supply. Equipped with 1.14 65K LCD and SD card connector

Now T-Beam V1.2 with SX1262 and Neo8M GPS is added to #LoRa #APRS tracker supported boards. #Hamradio
github.com/richonguzman/L…

#meshtastic Co se mi to zase přihodilo😂. RPI Pico W + Waveshare SX1262 Lora Node Module. Bohužel neumí Bluetooth (snad časem), tak jsem musel přes serial nastavit připojení k WiFi AP. Ze sklepa jsem vyhrábnul LoraWan GW, anténu tedy mám. V MB bude!
rpishop.cz/pico-karty/425…

Now Heltec Automation Wireless Tracker (GNSS+sx1262) added to #LoRa #APRS Tracker firmware
github.com/richonguzman/L…
Order it here: s.click.aliexpress.com/e/_DCWIUad

CatSniffer is an original multiprotocol,& multiband board made for sniffing, communicating,& attacking IoT devices. That integrates the new chips CC1352, SX1262,& SAMD21E17 (Sub 1GHz & 2.4GHz).

github.com/ElectronicCats…

#SoftwareDefinedRAdio #SDR
#LoRa #LoRa WAN
#BLE #ZigBee

Our online store is now open!

shop.objexlabs.com

#pcb #pcb a #lora #esp32 #sx1262
#pcb a #powerdelivery #pps #usbc

Some key features of OBJEX Link S3LW.

shop.objexlabs.com/products/objex…

PCBs manufactured by PCBWay

#esp32 s3 #lora #sx1262 #objex #esp32 #powerdelivery #pps #electronics #embedded #pcb design #iot #internetofthings #pcb #pcb a

Semtech SX1262 Sensor nodes

ELPM-S3LW & ELPM-S3
Now the module is ready for mass production + certification process. I have improved several things compared to the previous version.

Features:
- ESP32-S3FN8
- SX1262 862 to 928MHz
- Power latch, LDO and RTC 1-100nA

PCB manufactured by PCBWay

First order with the purple PCB from OSH Park for continuing #LoRa experimentation. Now waiting the SX1262 Chips to solder. PCB work by C. Pham

Call for volunteer to test sx1262 LoRa Modem.

Detail see: thethingsnetwork.org/forum/t/call-f…

New Semtech Corporation #LoRa LLCC68 is a SX1262 that can't go to SF12. Save $1, use LLCC68 with SF11 & Haystack XR2 coding (it beats SF12, anyway).

LoraType by AutomationArt

github.com/AutomationArt/…

‘teletype tweeting’

It uses rf signal on ISM band,which allows users to be of Internet connection,in case of emergency situation.

It works like walkie talkie.

#SoftwareDefinedRadio #SDR
#LoRa #LoRa WAN
#HamRadio #SX1262 #APRS

Pre-orders for engineering samples (limited units) start on Monday! 🔥

shop.objexlabs.com

PCB manufactured by
PCBWay

#pcb a #pcb #design #engineering #hardware #lorawan #dev #dev kit #sx1276 #sx1262 #objex #esp32 #powerdelivery #pps #usbc

#groundstation #semtech #sx1262 #e5 #lorae5
veeeeery affordable....

Borderline #retrocomputing . I have finally managed to get GOST (aka GOST R 34.12-2015: Block Cipher 'Magma') working on my IoT platform of choice, RAKwireless RAK4631. It needs some polishing, but combined with my LoRandom library for sx1262 (also featured here), ../..

Finally managed to find instructions for reversing the protocol for Ebyte e32-868T20D Lora module! Now I have a complete #micropython example of RX/TX between generic sx1262 and Ebyte e32. Thanks to the unsung heroes of a github Lora thread who did the heavy lifting!