New firmware for IP rotator fixes several bugs, can be uploaded via web interface, available here...
github.com/ok1hra/IP-rota…

3D printed transport box for the popular IC-705
printables.com/cs/model/62221…

Some measurements on the Icom VS-3 Bluetooth headset.
remoteqth.com/w/doku.php?id=…

New project from our RAJlab finished! The openWSPR receiver is a stand-alone HF receiver for WSPR.
remoteqth.com/openWSPR_rx.php

An example of using a custom map for VHF antennas in Simple rotator controller V.
remoteqth.com/single-rotator…

#DnesBastlim ESP32 3DPrint WX Station APRS/LoRa by Dan. Čeká mi tu už pár měsíců a fakt se stydím! Já si snad pauzu ld nových projektů ještě o rok protáhnu 🤭😄 (Ne že to někdo vezmete vážně!!! To byl vtip!)

Mám za sebou první den tisku, už to začíná dostávat tvar :))

New 3D print APRS WX station KIT
remoteqth.com/w/doku.php?id=…
Connected by ethernet and powered via POE, with many more features...

OpenSCAD + KiCad PCB + Prusa3D + Arduino + aprs.fi =♥️

How work
youtube.com/watch?v=U9aj-S…

NEW e-ink WiFi display for IP rotator
remoteqth.com/w/doku.php?id=…
It shows the status even after the rotator is turned off ;)

Web interface video
youtu.be/60EYhBZXhlY

NEW Simple rotator controler V
with web interface, MQTT support and much more
remoteqth.com/single-rotator…

New assembly manual for 3D printed rotator is complete remoteqth.com/w/doku.php?id=…
+ source updated with a MS size github.com/ok1hra/Paramet…
73!
#hamradio #3dprint OpenSCAD

Gyrotator include overlap
youtu.be/e5L1Iu4h3rg
OpenSCAD KiCad PCB #esp32 @mqtt

The result exceeded expectations:
2200 kg/cm (215 N/m)
Without destroying the transmission, it just stops.
Source on GitHub github.com/ok1hra/Paramet… (under construction).
Have fun!

What torque does a 3D printed antenna rotator achieve?

NEW 3-way active splitter in anclosure:
remoteqth.com/3-way-active-s…
#remoteqth #remoteqth com #qrocz #crazyantennapeople Remote QTH hamparts.shop Crazy Antenna People

Merry Christmas and HNY 2023. Our new e-shop is running. hamparts.shop

Vegan filter for 433 MHz :)
0.7 dB IL